Skip to content

Drain Jetting Heddon Greta

Drain jetting in Heddon Greta forces water through a choked pipe at high pressure, stripping grease, silt and root debris off the wall with no chemicals. The plumber in Heddon Greta names a fixed figure first and films the line before and after. Ring (02) 4063 3475 or use the form.

Not sure it's jetting you need? For slow sinks, gully overflows and sewers backing up, start with the blocked drains page for the wider picture.

Licensed plumbers and gas fitters · NSW Lic. 359278C

Last updated September 2026

Plumber working at the hose reels on the back of the ute

What Kind of Blockage Needs Jetting?

Not every slow drain calls for high-pressure water, but some faults respond to nothing else:

  • Grease and fat set hard along a kitchen or sewer line, sometimes bound up with wipes
  • Fine building silt and turf wash packed into a young estate drain
  • Root masses left in a line after cutting, where the wall still needs scouring
  • Scale and debris on older pipe that keeps narrowing the flow

If the problem is one object near the fixture, a simpler clear on the blocked sewer page may be enough. When the whole pipe wall is the problem, the jetter is the tool.

Plumber working a drain-clearing machine

How We Jet a Drain

The method is the same on a village cottage and a new estate build:

  1. 01

    Camera first

    The line is inspected before anything is done, so the jetter is aimed at a known fault instead of a guess.

  2. 02

    Head matched to the fault

    A cutting head for roots, a flushing jet for silt and grease, each sized to the pipe.

  3. 03

    Scour the full line

    High-pressure water travels the pipe, stripping the wall clean as it goes, with the flow carrying debris out to the gully or access point.

  4. 04

    Camera again

    The second pass records the clean wall, and you see the footage before the job is signed off.

Where a storm pit is the problem rather than the line itself, the stormwater drains page covers that work separately.

What Shapes the Price of a Jetting Job?

The figure moves on the job itself:

  • What is in the line Hard-set grease takes longer to shift than loose silt, and a root mass needs cutting heads and extra passes.
  • Hose length A choke close to the inspection opening needs less hose fed in than one sitting under the far end of the house.
  • The pipe itself Old earthenware gets lower pressure and a gentler head than PVC, which takes time and care instead of force.
  • Getting in If the only opening is buried under new paving, it has to be found and exposed before the hose goes in.

A clear booked for a Sunday or late at night is priced for that time, and the figure is agreed on the phone.

Two Ends of Town, Two Chokes

Silt in the new estate

In the Avery's Green releases, dirt from building stages still under way and loose soil from fresh turf wash into drains laid within the last few years, then settle where the fall is shallow. Flushing it early stops it hardening into a full choke.

Grease and roots in the village

Waste from the colliery-era cottages on Main Road still runs through earthenware, whose rough inner surface grabs fat and scraps while the joints admit roots. Clay like that is cleaned at a reduced setting.

Storms find the weak spot

Yearly rainfall averages 843 millimetres, and water runs off the level clay blocks quickly, so a drain already half full of silt overflows when a summer storm arrives.

"We talked through the options of our blocked kitchen sink drain (not just an s bend problem) and came to the perfect long term solution at a reasonable price." Debbie

Plumber pulling fittings from the ute drawers

When Jetting Isn't the Answer

When we're not the right call: a jetter clears what is inside the pipe, and some faults are the pipe itself. Where the footage shows a collapsed section or a badly cracked line under the old village core, water will not fix structure, so we move to pipe relining, which seals the old line from the inside without an excavation. A choke that sits beyond the junction in the street sewer is a Hunter Water repair, and we give you the details to report it.

Drain Jetting Questions From Heddon Greta

Does jetting clear tree roots in Heddon Greta drains?

Yes. The cutting head slices roots out of the line and scours the wall clean behind them. Roots tend to come back through the same joint, so the footage shows you exactly where, and the follow-up options sit on the tree root work page.

Do you use chemicals as part of the jetting job?

No. Jetting is water only. The pressure and the specialist heads do all the cutting and scouring, so nothing caustic is left sitting in the line or heading downstream toward the storm network.

Is the camera check included when you jet a line?

Yes. The camera goes through first to confirm the cause, and a second pass afterwards shows you the clean wall. That footage is part of the job, not an extra, and standalone camera runs sit on the CCTV drain inspection page.

How long does a jetting clear take?

It depends on the distance between the opening and the choke, and whether the pipe is clay or PVC. You approve the price before the jetter turns on, and the camera shows the line flowing before we pack up.

Need a plumber? Call or send the form

Call (02) 4063 3475 or send the form below. Available 24/7, you see a fixed figure ahead of any work, and every job carries our 365-day warranty on all work.

Call (02) 4063 3475

Request a callback

Leave a name and number and a plumber will ring you back.

We use your details only to call you back about this job. See our privacy policy.

Call (02) 4063 3475 Get a quote